Planning Large-Format UV Printing on Glass Panels
Check printable area, safe loading, panel support and registration before committing to a large-format glass job.
Match the panel to the table and loading route
Provide panel dimensions, thickness, weight and any film or fixtures. Check the quoted machine's printable area, supported media size and distributed load separately. Include the lifting method and operator access. Use the printer maker's approved support and loading instructions.
Verify height and registration
Check how the panel is located and how height is set across the print area. Confirm that stops or fixtures do not project into the carriage path. Print an alignment test that spans the actual artwork area, then check position at several corners. Document the approved setup before repeating it.
Run the full-panel trial
A small coupon helps qualify ink and appearance, while a full panel reveals handling and registration constraints. Record time from loading to accepted panel, including cleaning and inspection. Verify the view direction and edge margins against the drawing before counting the panel as accepted.
What to record before production release
Record panel and fixture weight, usable print margins, the loading method and the maximum approved height variation. Use an alignment print across the artwork area so registration differences near the far corners are measured.
Related equipment and reading
Send your drawings or samples for review.
Technical reference
Mimaki JFX600 operation manual. An example of documented table loading, suction zones and positioning constraints.