MANUFACTURING APPLICATIONS

Manufacturing Case Studies

Explore workshop demonstrations and worked examples for aluminum profile machining and digital glass printing.

Door Hardware Machining 4 results

Three automated tool changes per stile save a modeled 33 seconds each cycle, or 66 minutes across 120 stiles under the stated routing.

A 7 mm hole gives a 6 mm fastener 0.50 mm of radial room. The assumed alignment offsets leave just 0.05 mm for finish and other effects.

A nominal 4.0 mm remaining section falls to 3.5 mm in the adverse tolerance stack, below the example’s 3.8 mm requirement.

A 30 mm guide ring and 24 mm cutter give a 3 mm radial offset. Check the exact hinge variant and routing step before programming.