Choosing CNC Milling Cutters for Aluminum Extrusions
Select an aluminum-profile milling cutter from the slot geometry, required reach and available chip clearance.
Read articleJINRENZN / ARTICLES
News & Insights
Discover our latest news, ideas and product insights.
Fixtures & Quality 6 results
Jinren JR-3000 Cross-Face Accuracy Trial
Measure feature alignment across faces after a fixture flip on a three-sided profile machining job.
Read article
Aluminum Corner Connector Machining and Fit Inspection
Qualify connector locating faces, hole positions and assembled corner fit using the actual frame sections.
Read article
Thermal-Break Aluminum Profile Machining Checklist
Mark the insulating strip, aluminum walls and restricted areas on the approved profile section. Overlay holes and pockets from the finished drawing. Have the profile system supplier confirm the approved process where a feature approaches the thermal break.
Read article
Custom Fixtures for Aluminum Profile Machining
A fixture locates the extrusion against the drawing datum and holds it without movement or unacceptable surface marks. Stops establish position. Clamps hold the part against the locating surfaces during the cut.
Read articleThree-Sided Drilling and Milling for Aluminum Profiles
Compare flip fixtures, indexing and multi-axis heads for multi-side aluminum profile machining, with a sample-part acceptance checklist.
Read articleCould not load results. Please try again.