MANUFACTURING APPLICATIONS

Manufacturing Case Studies

Explore workshop demonstrations and worked examples for aluminum profile machining and digital glass printing.

Application Examples 22 results

At the assumed print speed, handling time and first-pass yield, a 420-minute production window delivers about 40 good glass panels.

Zero failures in 30 independent adhesion trials still allow a one-sided 95% upper failure-rate bound of about 9.5%.

Four 1.2 × 1.4 m glass panels fit within the reference print envelope on paper. Check whether the bed can carry the calculated 100.8 kg.

With a fixed 1,600 mm chord, a 98–102 mm rise window corresponds to a radius of roughly 3,188–3,314 mm.

A circular arch with a 1,200 mm chord and 180 mm rise has a 1,090 mm centerline radius and an arc length of about 1,271 mm.

Three automated tool changes per stile save a modeled 33 seconds each cycle, or 66 minutes across 120 stiles under the stated routing.

A 7 mm hole gives a 6 mm fastener 0.50 mm of radial room. The assumed alignment offsets leave just 0.05 mm for finish and other effects.

A nominal 4.0 mm remaining section falls to 3.5 mm in the adverse tolerance stack, below the example’s 3.8 mm requirement.

A 30 mm guide ring and 24 mm cutter give a 3 mm radial offset. Check the exact hinge variant and routing step before programming.